ABSTRACT A major drawback of directional and horizontal well drilling is the numerous complex computations required to be done while planning a well. These computations are very stressful and time consuming especially when done manually. One of the objectives of this study was to develop a user friendly Excel Spreadsheet program that would make the […]

ABSTRACT The scope of this work was to make detailed analysis of phase distribution in a horizontal pipe. This detailed analysis has been successfully carried out. Data obtained from wire mesh sensor (WMS) were used for the analyses. The operating fluid considered was an air/silicone oil mixture within a 6 m horizontal pipe with internal […]

ABSTRACT Gas condensate reservoirs are single phase at the initial condition. It changes to multiphase when the reservoir conditions are located between the critical point and the cricondentherm of the reservoir in the phase envelope. This makes it unique to providing a reliable source of energy for human usage. The objective of this study is […]

ABSTRACT Computer software is used extensively to increase productivity and reduce man‟s hours of labour. This work presents the development of a solids control software (SOLCON) which is designed for real time mud system management and quick performance of routine rig computations: determination of total solids and low gravity solids content; mud property and density […]

ABSTRACT With the ever increasing need to optimize production, the accurate understanding of the mechanics of multi-phase flow and its effect on the pressure drop along the oil-well flow string is becoming more pertinent. The efficient design of gas-lift pump, electric submersible pumps, separators, flow strings and other production equipment depends on the accurate prediction […]

ABSTRACT Petroleum Fiscal System (PFS) is a major determinant of investment decision in the exploration and production of oil and gas in any country. It basically describes the profitability relationship between the host government of the producing community and the International Oil Companies (IOCs). The comparative analysis of the performance of the fiscal regimes becomes […]

ABSTRACT Hydrocarbon production in the petroleum industry is often constrained by reservoir heterogeneity, deliverability and capacity of surface facilities, also optimization technique in the petroleum industry requires execution of several iterative runs by comparing various solutions until an optimum or satisfactory solution is found. In this study a comparative economic analysis to aid the optimization […]

ABSTRACT Solution gas drive reservoirs are characterized by rapid and continuous decline of reservoir pressure. This rapid and continuous decline of reservoir pressure causes direct decline of reservoir performance at early stages of the life of the reservoir. The principal source of energy which is gas liberation from the crude oil and the subsequent expansion […]

ABSTRACT Proper management of thin oil rim reservoirs is required to maximize recovery and minimizes coning tendencies. The objective of this study is to determine the effect of reservoir and fluid properties on coning tendencies in thin oil rim reservoirs and to develop numerical correlations to predict oil recovery and water break through time for […]

ABSTRACT This research work mainly investigates the development and the behavior of cones (both water and gas cones) in oil reservoirs supported by strong aquifer, and from which analytical correlations are developed for quick engineering estimates of the time for water/gas cones to break into the perforations of the producing wells. The studies treated the […]

ABSTRACT The research is aimed at the understanding of the various diagnostic plots for the analysis of water production that are available as well as the application of these methods in a case study. It also aimed at the establishment of a work flow for the evaluation of water production mechanisms. A workflow was developed […]

ABSTRACT Oil deposits are often found in association with a communicating gas or water zone. The production of the oil often leads to the coning of water or gas. This dynamic interaction can be captured by a properly detailed reservoir simulation, which unfortunately may not always be practical. To brigde the gap, researchers over the […]

ABSTRACT Maximum production from an oil well can be achieved through proper selection of tubing size. The selection of optimum tubing size must be evaluated when completing a well in any type of reservoir especially solution gas drive reservoir since there is likelihood of producing more gas as the reservoir pressure declines. The most widely […]

ABSTRACT During drilling operations, special attention must be given to wellbore hydraulics to ensure functional, safe, economic, and environmentally responsible delivery of the well. The Hydraulics system shares common purposes with the drilling fluid, it helps to control subsurface pressures, remove cuttings from the well, clean the bit, size the pump, increase the rate of […]

ABSTRACT Despite its numerous benefits the search and production of crude oil poses a lot of dangers to the environment. Among these include land, water and air pollution. Prominent among the major sources of E&P waste is drilling operations which form the second largest source of waste after production activities. The major drilling wastes are […]

ABSTRACT New sources of energy should be found to relieve the high demand of energy. Even though heavy oil and bitumen are difficult to produce due to their high viscosity which can be reduced by heating, with increased oil price, the production of these heavy oils are seen viable thus the need for a model […]

ABSTRACT A new method for analysing productivity index (PI) on vertical wells is the main objective of this study. Well performance is often measured in terms of the well’s productivity which is dependent on a number of factors such as the reservoir’s configuration, the type of completion, petrophysical and fluid properties, formation damage, etc. The […]

ABSTRACT As the demand for petroleum resources increases, drilling of oil and gas wells are often carried out in challenging and hostile environments. Among the top ten drilling challenges facing the oil and gas industry today is the problem of lost circulation. Major progress has been made to understand this problem and how to combat […]

ABSTRACT The production of formation sand is a problem associated with most oil deposits in the world. Major Sand production effects affect safety, well or field economics and continuous production. This has prompted the continued search for solutions to mitigate sand production in the oil and gas industry over time. The methodology often employed is […]

ABSTRACT Nigeria is endowed with huge proven gas reserves estimated to be 184 trillion cubic feet (Tcf). It ranks as the 7th holder of natural gas reserves in the world, and the largest in Africa. Nigeria also flares more natural gas than any other country; it accounts for 12.5% of the world‟s annual gas flared and […]

ABSTRACT Formation damage is an undesirable operational and economic problem that can occur in many phases of field development including drilling, completion, workover, production, stimulation, waterflooding and enhanced oil recovery. In fact, it is among the major causes of a well productivity reduction in petroleum reservoirs. Proper understanding of the factors causing these damages is […]

ABSTRACT The need to re-develop one of the Brown fields located in the Niger Delta area of Nigeria was necessitated by the fact that there are still three undeveloped reservoirs in the field.A total of six stacked reservoirs, A100 to A600 (all oil bearing with associated gas) were penetrated between 8552 ftss and 10652 ftss […]

ABSTRACT The concurrent flow of gas/liquid in pipes poses a great challenge due to the difficulty associated with the flow of fluid. The flow is characterized by the existence of flow regimes which can be identified by the geometrical arrangement of the phases in a pipe, with Churn flow being the least understood flow pattern […]

ABSTRACT One of the major challenges in reservoir engineering is the accurate description of the reservoir. This description is essential in all aspects of petroleum engineering, and is typically achieved through reservoir characterization by integrating various kinds of information obtained from the reservoir. One reliable source of reservoir information is well testing. Analysis of well […]

ABSTRACT This research work mainly investigates the implication of void prediction in the estimation of total pressure gradient in vertical pipes for multiphase flow systems. Experimental data was collected for a multiphase flow system with silicone oil and air as the liquid and gas phases. The void fraction prediction was carried out using Microsoft Excel. […]

ABSTRACT This study presents an investigation of the hydrodynamics behaviour of slug flow in an inclined (80 degree inclination) and 67 mm internal diameter pipe. The study provides a more rudimentary explanation into the physical phenomenon that controls slug flows behaviour and the way these parameters behave under variable flow conditions. Various correlations for determining […]

ABSTRACT Determination of optimal well locations for infill drilling is a challenging task because engineering and geologic variables affecting reservoir performance are often nonlinearly correlated and have some degree of uncertainty attached to them. Numerical models which are the basis of well placement decisions rely on data that are uncertain, which in turn translate to […]

ABSTRACT Huge amount of hydrocarbon in place is left unrecovered. Integrated reservoir management, in addition to the use of new technologies improves hydrocarbon recovery. Intelligent completion is one of the technologies which enhance reservoir management thereby improving the hydrocarbon recovery.This work presents a review of intelligent completion technology, guidelines to evaluate the decision whether or […]

ABSTRACT The Niger Delta is Nigeria’s and Africa’s most prol ific producing basin and has some untapped oil resources because of their marginality. The development of marginal oil field in Nigeria has now become an important strategic issue. This is due to the vast availability of these fields scattered all over the Niger Delta. The […]

ABSTRACT Hydraulic fracturing has been an effective technique to stimulate damaged wells or wells producing from low-permeability formation. It has been established that the orientation of a hydraulic fracture is perpendicular to the direction of the least principal stress in the formation. Thus, most pressure transient analysis techniques are based on the assumption that the […]

ABSTRACT The purpose of this study is to examine the factors associated with health seeking and prevention of human papilloma virus infection. Three (3) research questions and hypotheses were raised to solve the research problems. The research employs exploratory, survey and descriptive research methods using quantitative and qualitative analysis. The population of this study comprises […]

CHAPTER ONE 1.1  Background To The Study Corruption constitutes a great challenge to the realization of democratic dividend in form of Education, social, economic, and political development of any nation. The issue has therefore generated public outcry and the concern of government to stem it out of the Nigerian cultural heritage.. The United Nations Global Programme against […]

CHAPTER ONE1.1 BACK GROUND OF THE STUDY Nigeria as a sovereign nation operates a federal system of government i.e the federal government, state government and the local government councils.Onwo (1992) Observed that each level of the three tiers of government derive its powers not from the magnanimity of the central government but from the constitution; each level […]

CHAPTER ONE 1.1        Introduction              The rapid growth of information technology has enhanced the importance of online advertising. Out of the innovations of the information technology, internet is by far the most attracting considerable media.             Moreover, the internet is emerging as the most important source of information because of its ease wealth […]

1.1 INTRODUCTIONNew technological inventions can have a great impact in organizations through its contributions to change the social environment while expediting sharing of knowledge and the development of new ideas. (Kling et al, 2005). Social Media will come in handy as a good example of new technological innovation that is making a great impact in […]

CHAPTER ONE INTRODUCTION 1.1      Background of the study In recent years most adverts on television has a celebrity that projects the products or services by way of using the product and with this, has influence on the buyers and customers of these products and services and thus the sales volume of an organization. Basically, a celebrity […]

CHAPTER ONE INTRODUCTION 1.1 Background to the Study Infection control is an aspect of healthcare delivery that deals with the curtailment of the spread of infection within the healthcare set-up, be it from patient-to-patient, patient-to-staff, staff-to-patients or staff to staff. According to World Health Organisation (WHO, 2011) the components of infection prevention and control are […]

CHAPTER ONE INTRODUCTION 1.1 Background to the Study Pregnancy and delivery are supposed to be a safe process when well-managed, but a number of times it involves major health risks, even to women with no pre-existing health problem. Thousands of women die all over the world from issues directly associated with pregnancy, delivery and its […]

CHAPTER ONE INTRODUCTION 1.1   Background to the study             Human Immunodeficiency Virus and Acquired Immune Deficiency Syndrome (HIV/AIDS) is a pandemic disease in which the body’s defense mechanism is weak and this makes the body unable to get rid of infection (NACA, 2001). HIV/AIDS is an incurable diseases that makes the casualty susceptible (Rajeev, 2012), […]

CHAPTER ONE INTRODUCTION 1.1 Background to the Study The quality of care received during pregnancy and the place of delivery are great determinants of maternal and child morbidity and mortality. Improving and sustaining the quality of care in healthcare institutions has been an area of concerns and recurrent issue over the year. The client’s expression […]

CHAPTER ONE INTRODUCTION 1.1    BACKGROUND OF THE STUDY Since we live in an age which is marked by uncertainties in business prospects, it is in a setting of this nature that the budget is of great importance. Nearly everybody budget to some extent, even though many who prepare and use budget do not recognize that […]